APPLICABLE ON NOKIA MOBILE ONLY USING J.A.F TO FLASH NOKIA MOBILES ,HACKED FIRMWARE FLASHING 
 Here i want to show you mobile phones phoenix service software ,reinstalling of firmware files. SO THE PROCEDURE IS VERY EASY :-
 1)J.A.F with PKEY EMULATOR.
 2)And after that you need window pc or laptop with window7 or xp installed.
 3).net framework or higher than it installed on it.
 4)After this you need one software named as NAVIFIRM which is used to download firmware files from internet(If you allready have firmware files of your nokia mobile ,then its ok).
 5)Now remove the sim card ,switch off your mobile and memory card from you mobile. After this follow various steps :-
 1. Create a path “C:Program Files Nokia Phoenix Products RM-xxx” in your PC (replace xxx with your phone’s actual code, for example it will be RM-596 for Nokia N8 – press *#0000# at phones standby screen to know yours). No need to create this path if you already have Phoenix installed in PC as Phoenix Service Software creates this path automatically (except the last folder). Download official firmware files for your phone via Navifirm and paste them in “RM-xxx” (the last folder in the above created path).
 2. Install J.A.F. in your PC (JAF is compatible with Windows only (XP, etc). Now copy and paste “jaf_nok4models.ini” file (given with JAF in the archive you downloaded) into C:Program FilesODEONJAF (Confirm overwrite to replace the original one). Connect the phone to PC via data cable and select “PC Suite Mode” (at phone’s interface). If it is the first time you have connected the phone with PC then let the phone drivers install completely.
 3. After installation, don’t open JAF via shortcuts that appear on desktop. Instead launch OGM_JAF_PKEY_Emulator (given in the downloaded archive) and click “GO” button, if it gives error then try launching it again. Wait for a while as the emulator verifies J.A.F. installation and finally JAF is launched with an error “BOX DRIVER NOT INSTALLED”, click OK
4. At JAF interface select “BB5 Tab”. Now there are three scenarios
 a) If you want to flash the phone to factory settings (refresh or reset settings of the existing firmware) then at BB5 tab select/tick “CRT 308” “Factory Set” and “Factory Settings” and click “FLASH”. Wait for the process to be completed.
 b) If you want to update phone’s firmware to latest or to reinstall the existing one with official files (downloaded via Navifirm) then proceed to Step 5
. c) If you want to flash the phone with a new cooked (custom or hacked) firmware then copy the hacked firmware files (Usually uda.fpsx, rofs3.fpsx) to the folder where you have already placed all the official firmware files (downloaded via Navifirm). Overwrite/Replace when prompted (the hacked file(s) must replace the corresponding official file(s). However if the overwrite prompt does not appear then the names differ for the two files. In this case you will have to rename the hacked file(s) exactly to the official one(s) for example if the hacked file name is RM-596_011.012_U01.01_79.92_prd.uda.fspx and the corresponding official file name is different then rename the hacked one to match the official one and place this renamed file to the C:…RM-xxx Now proceed to Step 5
 5. At BB5 tab select (tick) “Manual Mode”, “Dead USB” and uncheck “CRT 308”
 6. Now check/tick “Use INI” option and wait for a while until “Select Phone Model” box appears
 7. Find and select your phone model from this box and click OK. The “MCU”, “PPM”, “CNT” and “APE Variant” boxes turn green, however if they don’t then go to step
 7 (b) below a) However if your phone model is not present in the “Select Phone Model” box then close JAF and download (search Google or look here) and copy the latest “jaf_nok4models.ini” into C:/Program Files/ODEON/JAF (Confirm overwrite when asked) and repeat steps 3, 4, 5, 6. Proceed to Step 8 b) However if your phone is still not there in the “Select Phone Model” box (or the MCU etc circles do not turn green) then go to “C:…RM-xxx” (created in Step 1 above) and rename .core.C00 file (a firmware file present in C:…RM-xxx folder) to .c0r now go to JAF and uncheck “Use INI” box. Now click on “MCU”, “PPM”, “CNT” and “APE Variant” circles one by one to manually select following files – MCU – .c00/.c0r PPM – rofs2 CNT – rof3 APE – uda (These files are present in the folder “C:….RM-xxx” created in Step 1 above)
 8. All set for flashing, now switch Off your connected phone and click “FLASH” button at JAF
 9. A warning box will pop up, click “YES”. Now press phone’s Power ON/OFF button for a second (Don’t hold it for long). J.A.F. will start the flashing process. Wait for the process to complete (until “Done!” appears in the JAF “Status and Results” window).
 10. Disconnect phone from PC. Remove and re-insert phone’s battery and switch it on. Done!! Finally, that is your flashed phone….whew!!!
 NOTE –

 1. Be careful not to touch mobile or data cable during flashing as sudden (even momentary) connection loss may irreversibly damage your phone. Also make sure that PC/Laptop/Netbook does not “Shut Down” suddenly (due to power interruption or battery low etc).
 2. Don’t panic if the phone is not starting up or behaving weirdly (frequent restarts, hangs etc) after the successful flashing process. Try the following – a. Reset the phone to factory settings via Menu/Settings b. If it does not solve the issue, format the phone with codes (read Here) or hard reset it by key combinations  from here. c. Still having the issue, flash the phone with factory settings via JAF (Follow Step 4.a above) d. If the problem still persists, re-flash the phone with the official firmware files using J.A.F. (Follow Step 4.b above) or update firmware using Ovi Suite
. 3. If the PKEY_Emulator is giving error on launch in Windows 7 (or Vista) then run it in compatibility mode – Right click on PKey app icon – Properties – Compatibility – Tick/Check “Run this program in compatibility mode for Windows XP (Service Pack 3 or 2) – Click “Apply” and then OK). Now it should run fine….. please try it and i hope it work.
4.For install this on your Nokia mobile ,then you should have pre installed Nokia ovi suit or Nokia PC suit on your laptop.
click here for download PKEY_Emulater,Navifirm,jaf

click here for download ovi suit


FOR VIDEO TRY THIS:- http://www.youtube.com/watch?v=cDT3lIuq_K4&feature=related

Internet Download Manager free activated with cleaner

Internet Download Manager supports proxy servers, ftp and http protocols, firewalls, redirects, cookies, authorization, MP3 audio and MPEG video content processing. IDM integrates seamlessly into Microsoft Internet Explorer, Netscape, MSN Explorer, AOL, Opera, Mozilla, Mozilla Firefox, Mozilla Firebird, Avant Browser, MyIE2, and all other popular browsers to automatically handle your downloads. You can also drag and drop files, or use Internet Download Manager from command line. Internet Download Manager can dial your modem at the set time, download the files you want, then hang up or even shut down your computer when it's done.




Other features include multilingual support, zip preview, download categories, scheduler pro, sounds on different events, HTTPS support, queue processor, html help and tutorial, enhanced virus protection on download completion, progressive downloading with quotas (useful for connections that use some kind of fair access policy or FAP like Direcway, Direct PC, Hughes, etc.), built-in download accelerator, and many others.


Latest Version adds IDM download panel for web-players that can be used to download flash videos from sites like YouTube, MySpaceTV, and Google Videos. It also features complete Vista support, YouTube grabber, redeveloped scheduler, and MMS protocol support. The new version also adds improved integration for IE and IE based browsers, redesigned and enhanced download engine, the unique advanced integration into all latest browsers, improved toolbar, and a wealth of other improvements and new features.

For downloading click here:-


click here



Note : No need to use any external cracks or serials.The software will silently get installed on your system without any hazzle.




:::::: Please Follow The Below Installation Process ::::::


1.First uninstall any previous version of IDM installed on your system by choosing complete uninstall instead of the default one.


2.Use the latest CCleaner version i have provided and do a registry clean-up.


3.Once the clean-up process is complete, restart your PC.


4.Now just go to the directory where you have downloaded IDM provided by me and double click on the exe to start the installation.


5.As i said it's a silent installation, so after clicking next it starts the hidden installation steps and will automatically get installed on your pc.


6.It's now ready for use and will be available under your all programs folder in start menu.







i hope u like it:)

 I HAVE TWO METHODS TO MAKE YOUR PIRATED WINDOW USEFUL

1)"HEY GUYES IF YOU WANT TO extend YOUR WINDOW 7 trial THEN I HAVE AN AWESOME TRICK"

4)after 5 or10 seconds it give u msg
thank you :)

otherwise to activate your window 7 you can download from here:-

 

i hope u also like this.

2)Download Windows 7 Activator Now

Welcome to this blog...a blog that discusses everything’s about Microsoft Windows 7 and Windows 7 activator.
There are 6 different Windows 7 versions avail­able for users with differing needs. However, Microsoft is expected to focus its marketing effort on just three editions - Home Premium, Professional and Ultimate. As a quick rule of thumb, Windows 7 Home Premium is targeted at consumers while Window 7 professional and Ultimate is targeted at small businesses.
Please note that each higher edition of Windows 7 is a super set of its lower edition. That is, all the features available in Starter Edition will be available on the Home Basic edition, and the Home Premium edition will include all the features of Home Basic, and so on. So you will know that the Windows 7 Ultimate edition is the best.
Window 7 ultimate combines every thing from all the editions into one complete package. It is really the same as the Enterprise edition only that the Enterprise edition will be sold through volume licensing to companies, as well as through the Software Assurance program. The Ultimate edition, however, will be available to retail customers.

||Download Windows 7 Activator ||

The Windows 7 Activator is a third-party software that used to activate the Windows so that the message "Your Windows is not genuine" is not displayed. In other words, once Windows 7 activated successfully, your copy of Windows 7 is genuine and legal.
Basically, there are two methods to activate Microsoft Windows 7:
1.) Activate Windows 7 using the Internet
2.) Activate Windows 7 using the telephone
To start the activation process, open Windows Activation by clicking the Start button, right-clicking Computer, clicking Properties, and then clicking Activate Windows now.‌ Choose a method to activate and the both methods required a valid Windows 7 product key in order to successfully activate it.
However, here come with handy Windows 7 activator that can help you activate Windows 7 without the Windows 7 product key!

Windows 7 Activator 1: Windows Loader v2.0.9

This loader application has been used by many people throughout the world to activate Windows 7 successfully. The loader can activate the Windows 7 permanently and more safely. It’s suitable for all versions of Windows 7,Vista, Server 2008, and Server 2008 R2.
It’s well known for passing Microsoft's WAT (Windows Activation Technologies) and is arguably the safest Windows activation exploit ever created. The application itself injects a SLIC (System Licensed Internal Code) into your system before Windows boots; this is what fools Windows into thinking it's genuine.
So, it’s really hard for Microsoft to detect the presence of loader when you use Windows Loader.  This loader can withstand against any Activation update.

Windows Loader v2.0.9 Features, Download and Installation Guide

This Windows loader application has been used by many people throughout the world to activate Windows 7 successfully. The loader can activate the Windows 7 permanently and more safely.
Windows loader is suitable for all versions of Windows 7,Vista, Server 2008, and Server 2008 R2. It’s also compatible with Windows 7 SP1 and all system updates and it will run on 32-bit (x86) and 64-bit (x64) systems.
The unique thing about this loader is that all the key parts of the exploit are encrypted with a custom encryption. The exploit runs before Windows started up so it's harder for Microsoft to prevent. It patches all necessary tables making activation look authentic and every user has a unique version of the exploit installed on his/her system.

Windows Loader Features

¨       Can be run as a standalone application
¨       Works well with all system languages
¨       No core system files get modified
¨       No extra processes are run so you have nothing eating at your RAM
¨       Custom OEM information can be installed
¨       Argument support for silent installs
¨       Can be used for pre-activation
¨       Application integrity checking
¨       Custom error handling
¨       Support for hidden partitions and complex setups
¨       Can work alongside Linux’s GRUB or any other boot manager
¨       Works with True Crypt and many other types of hard drive encryption applications
¨       Add your own certificates and serials externally
¨       Offers certificate and serial installation only for users with an existing SLIC  2.1
¨       Automated system profiling (The application matches everything up for you)
Click Here to Download Windows Loader v2.0.9 Now.

Windows 7 Activator 3: Trilogy 4.2

The Trilogy 4.2 is another great tool that can be use to activate Windows 7. Actually this is 3-in-1 tool that not only can be use to activate Windows 7 and Server 2008, you also can use the tool to activate Microsoft Office 2010 VL edition and Adobe Creative Suite 5.5.
The best thing is that it works on all Windows 7 and Servers 2008 versions, it covers different/all languages, and it can be use in both 32-bit and 64-bit editions of Windows or Office. So, you should give it a try.
click here for download

Windows 7 Activator 5: 7Loader v5

This Windows 7 activator need to work together with another activator called Remove WAT. Because of this, it may not very popular as it’s not a stand-alone activator.
However, it’s also a good alternative for you since no activator can guarantee that you can successfully activate Windows 7.
So, for details instructions on where to download and how to use the 7Loader activator, please click on the link below.
Requires another tool running after using the activator.
¨       Custom for specific brands such as Dell, Compaq, Asus, etc
¨       Suitable for all versions of Windows 7
Click Here to Download 7Loader Now!

How to use the 7Loader activator to activate Windows 7? 

Basically it involved 2 stages and here is the stage one:
¨       Download 7Loader activator here and extract it using the compression tool to your computer desktop.
¨       Uninstall any other Windows 7 loaders/activators in your PC (if any)
¨       Right-click on the 7Loader Release 5.exe file and click on Run as administrator.
 
¨       From the above screen, click the Select Task drop-down menu. You will see the following screen.

¨       Choose a brand name that you want your computer to show. Example: Asus, Acer, Dell, NEC, etc.
¨       Then click on Activate slic present button and wait (be patient while it works) then another window will pop-up, just choose anything.
¨       Afterward click Install information 32Bit button or Install information 64Bit button depending on your version of Windows 7 (32-bit or 64-bit).
¨       Now click the Hazar option 2 button and wait until finished.
¨       Once completed, restart the PC.
Note: For those who just want a straight forward activation just click on None slic option 1 button followed by Hazar option 2 button then reboot your computer.
Then, proceed to stage two:
¨       Download RemoveWAT v2.2.6 and extract it using the compression tool to your computer desktop.
¨       Right-click on the RemoveWAT 2.2.6.exe and choose Run as Administrator from the pop up menu.
¨       Click Remove WAT button and wait until you see the message on successful completion of the procedure.
¨       Computer will restart automatically and the system is activated.
I hope that the instructions on 7Loader activator here is clear to help you activate your copy of Windows 7.

i hope you will try it :))

thank you